ASUS VG248QE DVI Cable: Report & Troubleshooting

If you are one of those who have ASUS vg248qe DVI cable issues, then don’t worry because, in this post, you will learn about fixing the ASUS vg248qe DVI cable issues. 

Nothing is more frustrating than turning on the pc only to discover a blank screen. It puts a halt to all of your plans and leaves you exhausted.

When you initially encountered this problem, you were on the edge of a nervous breakdown; would you have to pay for a new one? Is the hardware you invested your hard-earned money on broken, or worse?

However, as we experienced firsthand, if your display says there’s no signal, it’s not always an indicator that your monitor or hardware is broken. 

In many cases, it might be something as simple as a hanging cable. In this in-depth guide, we’ll walk you thru the diagnostic method for the Asus vg248qe DVI cable. We’ll go over some of the most common fixes as well.


Why is my Asus vg248qe Monitor reporting that there is no signal?


When your display is turned on but not receiving a signal from the connected device, the no signal error shows; this problem can be caused by a wide variety of factors, some of which are more serious (and expensive) than others. These are some of them:

  • Cables that be loose or unreliable
  • The display has been set up incorrectly.
  • Drivers that are no longer supported
  • Hardware failure due to a faulty monitor

Troubleshooting why is there no signal on your Asus vg248qe monitor?


In this post, we’ll go through how to effectively troubleshoot your display. We’ll start with the most basic questions and work our way up to the more complex ones.

To be clear, if your device is causing the no signal issue, things get a little more complicated. There is no need to skip any of the stages. In some cases, it might be a software problem, while in others; it could be a hardware problem.

Before leaping to a conclusion, please attempt all troubleshooting options.


DVI No Signal Issue with ASUS VG248QE


DVI provides a better picture than VGA connectivity, allowing you to get the most out of your display.

DVI provides you with the greatest possible display while giving you no problems. However, these DVI connections do not have any noise or other types of interference, but you may get a no signal warning on the screen along with a black screen.

Examine the result Resolution:

The output resolution is usually the source of the problem if you’ve recently modified or increased your resolutions. 

That might be the issue that’s causing you to get this error. You’ll want to make sure the output display or projector you’re using supports the resolution you want to use. 

This will aid you in addressing the problem permanently. You must adjust the output resolution to match the monitor you’re using, and will enable you to get it to work without any problems.

Because there are different types of DVI cables on the market, you should carefully examine the cable.

You should double-check that the cable you’re using can handle the settings and also that the resolution is set correctly. This will aid you in addressing the problem permanently.

Check the Rate of Refresh:

Another aspect of the settings to be aware of is the refresh rate. You’ll need to double-check that you’ve adjusted the refresh rate appropriately. 

This will guarantee that you are putting it to the best possible use. After that, you must adjust the refresh rate and save the changes. 

You will need to restart the display once you have corrected all of the settings in order for the problem to be solved best for you.

Configure the Cable:

There might be a problem with the DVI cable being loose, or there could be a variety of other causes. You should double-check that it’s all operating properly.

To begin, detach both the external devices from the DVI connection. After that, clean both sides of the adapters and double-check that both ends are properly secured.

This will most successfully aid you in fixing the no signal problem that your DVI cable is displaying, and you’ll be able to experience a faultless display without any troubles.

Changing the Cable:

You may be experiencing this difficulty as a result of faults or mistakes with the cable, which may have been broken or gone faulty. 

Just make sure you’re obtaining the proper cable and that it’s free of any faults or problems before plugging it in. 

This will make it operate flawlessly for you, and the error will be resolved permanently.


FAQs


Is 144Hz DVI supported by the ASUS VG248QE?

144 Hz is supported by the VG248QE through Dual-Link DVI & Display Port. Unfortunately, does not enable 144 Hz through HDMI.

Is 144Hz supported by all DVI cables?

Although DVI is a more widely used connection, be in mind not all DVI versions are the same. Only the Dual-Link DVI-D port supports 1920 x 1080 at 144Hz or 2560 x 1440 at 75Hz, whereas other DVI ports are limited to the same bandwidth as VGA.

Is an HDMI cable included with the ASUS VG248QE?

A dual-link DVI cable and an audio cable are provided with the VG248QE; however HDMI or Display Port cables are still not. A three-year part, labor, and backlight warranty are included with the monitor.


Conclusion


So this is all from us about the Asus VG248QE DVI cable. The NVIDIA 3D Vision 2 kit is compatible with the VG248QE when used on the DisplayPort and DVI-D dual-link interfaces.

To create a truly highly immersive experience, link up to 3 Full HD displays.

The VG248QE offers DisplayPort, HDMI, and DVI-D dual-link connectors on the input and output sides, allowing it to accept a broad range of media devices, including Blu-Ray players and gaming consoles.

Must Share:

My name is Aslam, and here is my story: I am a pickmonitors(Monitors) expert and have been in the field for over 6 years. I am currently working as a monitor expert and have done work for companies such as (Apple, Google, and Samsung).

Leave a Comment